Amcrest camera login

Amcrest camera login DEFAULT

Amcrest Invalid Username Or Password​

User Authentication: Understanding The Basics & Top Tips

The most important aspect of website users is the authentication of human to computer interactions. Hence, user authentication is important to understand when someone is creating a website login procedure. Therefore, whether you are looking to be up the internal security or increasing the customer acquisition, or providing a better experience for exploring your site, it is important to know about the authentication process basics. Therefore, we are presenting you with this guide. In this way, you can understand: With the help of better understanding, your organization can understand the better understanding. With the help of a better understanding, your organization can be more effective with the registration and the login processes that can go past the traditional offerings. Moreover, when you go for more different types of authentications, you can get several conventional offerings. Furthermore, when you go for more user authentications, you can get the passwords and more options with fewer alternatives. What can User Authentication Do? The authentication process is the security process that can cover the human to computer interactions that will require the login and can register there. Furthermore, simply the authentications can ask each user about "who are you?" and verifies the response. Moreover, when users can ask for the account, they must create a unique ID and the key that will allow them to access the account later. Mostly the password and username are used as the key and ID. However, the credentials that can include various types of user authentication as well. How Does the User's Authentication Work? The authentications are mostly interchangeable with two separate terms that can work together and create a secure login process. To put the user authentication, you must have three up to the mark tasks: Manage the user connection between the website user and the human user. Verify the identities of the users Decline or approve from the authentication so that the user can identify the user. Importance of User Authentication Understanding the user's authentication is important because it is the key step process that can keep unauthorized users access to every sensitive information. Moreover, they strengthen the authentication process because one user has sensitive information, and another user can only have access to that information if they want. Top User's Authentication Methods Some methods are also called the authentication factor, and for that reason, there are three types. Knowledge Factors: The foremost factor in this regard is the knowledge factor. It can be anything the password, username, and PIN. Furthermore, the challenge with such characteristics is that they can be weak in security because they can be guessed or shared. Possession Factors: Anything that the user must have to log in is the possession factor. Moreover, the one-time password tokens are sometimes the link. Furthermore, there can be physical tokens, ID cards, and possession factors. Inheritance Factors: For a person using the biological characteristics, it is known as the inheritance factor. It can be facial recognition and finger scanning. It can fall into the category. User Authentication with No Password Having the password-less login system is the authentication method that mostly does not require password authentication. Moreover, this sort of authentication has become more famous in the past years, and you are more experienced in the few. Moreover, the most common ways of password-less login in this article are the two most essential cover methods. Biometrics: Fingerprints, facial recognition, iris scanning, and other types of verification through biological characteristics fall under the category of biometrics that can be considered under the inheritance authentication factor. Email Authentication: Email authentication is the most important and password-less user authentication. It mainly because anyone with an email account can use this method. Stronger Password: We encourage you to get the improved security and the stronger vulnerabilities that they used to bring due to the insecure user-generated credentials. It can take to get the password-free online password experience. Implement SSO Authentication: If you do not know about or you can go for the single sign-on, with the authentication, it is a process that can make you logged into the account even when you. Multi-factor Authentication Strategy: Multi-factor authentication is the one that uses the identification with the help of several authentications. For instance, a user can input their password, username, which will then email the link to get the security code. Exploring the Password-less Authentication You can implement a password-less option of login to your website. Moreover, security to the passwords and the security experts can become unreliable and obsolete for user authentication. Furthermore, the password-less logins will not require anything to remember anything. Moreover, the login process is completed with the help of the biological characteristics or through another account. Way to improve user authentication To make your login process more secure, user-friendly, you should know how to create stronger passwords to improve security. As we know, that passwords are not completely safe, they have various vulnerabilities, still, migrating the entire internet to a completely password-free online experience will take your long time. The best way is to create better passwords. Conclusion All in all, this is the best way to authenticate the password to get the optimum security. If you are going to apply the above-discussed user authentications and the given tips you can secure your system.

Read More
Sours: https://www.loginnote.com/amcrest-invalid-username-or-password

Many times the users fail to customize the settings of Amcrest products like camera, doorbell, and sometimes lose the password or setting etc, so may need to Reset Amcrest camera to its default setting. Here Amcrest Support guides you, on how to reset Amcrest camera to default factory settings, and find out other issues related to Amcrest camera, which can arise the need to Reset Amcrest camera. Resetting the device can resolve issues most of the time, provided it is diagnosed that it is related to camera. At times, the issue could be with network and access application and resetting wont help in those cases. You can follow the troubleshooting guide to isolate the problem with camera and network and then proceed with Amcrest camera reset. If the device has issues with any specific feature and is not working properly, Amcrest camera factory reset can resolve the issues most of time.  It is highly recommended to delete your device from your Amcrest Smart Home account before performing a factory reset, so that you don’t have any issues while reconnecting the camera to App.

Reset Amcrest Camera: Battery operated cameras

amcrest customer service

Know this important information before you Reset Amcrest Camera. A factory reset is the option to revert your device settings back to its original factory default, when you are experiencing problems with the device. To factory reset Amcrest camera device, you have to find where is the reset button and for Amcrest it is on the back of your Smart Hub device. You will need a pin or paper clip or similar object to reset Amcrest camera. Please find below the general  information on how to factory reset Amcrest device.

Amcrest camera reset Steps begin here: To start the Amcrest reset process, delete your Amcrest device from the Amcrest Smart Home app.

To delete your device please follow the steps given below

  • You need to log into your Amcrest Smart Home app and select your device ( you want to reset) from the Devices menu. 
  • Now find and tap on the Settingsgears2.png ) icon. 
  • In the options given on next screen please tap on Delete Device
  • This is very important that, If you want to save your old or previous recordings, you must select or tap on “Keep Recordings“.
  • Now you need to tap on Delete and the device will be removed from the account settings.
  • Now lets move on to the smart hub device and locate the reset button on the back of your Smart Hub. It is a tiny hole on the left side of the power port.
  • Insert the pin, or similar device, into the reset hole and while pressing it hold the reset button for 45 seconds. The LED on the Smart Hub will flash indicating the device is resetting in process. Once the flashing stops, you are done with the hard reset and Amcrest camera Reset is complete. 
  • For any kind help for setup issues after camera reset, please speak with Support desk.

 

amcrest camera IP address

Amcrest camera Soft Reset Via Web Interface

To find Ip address of your camera: Customers access their Amcrest Camera via Pc, Laptop, or Mac computer by opening a mainstream web browser like Firefox, Google Chrome, Safari etc. Some customers get stuck with Ip address after reset. To locate the camera’s IP address, you need to download our free Amcrest IP Config Tool software. Click to Download button Windows Mac or go to amcrest.com/downloads. After installing, find the IP address associated with the device you would like to view in the browser. Note down the IP address as you may need it for further setup or wifi settings.

Open the web browser (chrome safari etc) and enter this IP address into the browser. Press enter to access the web user interface.

Amcrest camera web access interface required in reset camera

In the web interface , enter the login credentials for your device. If this is often the primary time accessing the device, the username and password will both be admin. Click on Login.

How to reset Amcrest camera password :

If this is the first time logging into your device, you will be prompted to modify the password for your device. To modify the password, enter the new password you’d wish to use within the New Password field and ensure that the password used should be between 8 and 32 characters long with a combination of letters and numbers. Click OK and allow the stream to load. But at times, few of the steps given for resetting may vary according to your system and software and access device variables. On the Amcrest forum too, customers report for not being able to find the correct option according to their device interface. Still the process remain to access settings and perform Amcrest camera password reset through configuration settings. You can always talk to Amcrest support in case you find any difficulties while changing the camera password.

How to Reset to Default Settings

Note: Using the Restore to Default Settings button directly from the online interface of
your device won’t reset the admin password for your device. To reset the password, a
physical, hard factory reset will have to be performed and can vary from model to
model.
Step 1: Log in to the web user interface (Web UI) for your device. For more information
on the way to access the online UI for your device, click here.
Step 2: In the web UI, navigate to, Setup>>System>>Default Settings>>Default Settings.
Step 3: Click on the Restore to Default Settings tab located within the Default Settings
tab.
Step 4: A prompt will appear asking if you are sure that you would like to proceed with
the factory reset. Click OK to start the reset.
A reset of your device will occur. You can log out of the web UI and log back in. The
settings for your device are going to be reset to its original factory default settings.

Reset Amcrest Camera or restore default settings for your amcrest camera, application screen options image

How To Perform A Factory Reset on Amcrest Camera- Reset Amcrest camera

A factory reset of the Indoor Pro HD IP Camera to its original system state by erasing all of the knowledge stored on the device in an effort to revive the device’s software to its original manufacturer settings. Sometimes the security cameras stop to connect to the web servers, it is the time to reset to the factory specs, provided the wifi is confirmed to be in good functionality.
Note: Before performing a physical, hard factory reset, it’s recommended to first perform a reset via the online interface (Web UI) of the camera on a computer. This is useful also if you are doing not have direct, physical access to your camera. For more
information on the way to perform a factory reset within the web UI of your camera,click here.

There is also an external factory reset button lit by a LED located on the backside of the camera. Press and hold the factory push button for about 20 seconds, or until the green light changes to red. Once the light turns red, the process will begin. This will ultimately restore the device to its factory settings and can reset all of the camera’s settings.

This will reverse the settings back to its day one when the system was turned on. All your custom settings and information will be deleted in the process. The factory reset will finish by panning and tilting the camera, ensuring operation and therefore the light will turn green and the camera then gets completely reset back to its factory state.

Image showing how to Locate Amcrest camera reset button on the back  to load Factory default settings. Amcrest camera factory reset guide

A hard reset of your Amcrest camera will catch on back to its original state by removing all the information stored on your device. It will restore the System to the innovative software of the device with the default factory settings. Your password will be reset to the Amcrest default password which is admin.

HARD RESET AMCREST CAMERA: USING THE REST BUTTON

How to perform Amcrest camera factory reset with button on the camera itself


How to hard reset Amcrest camera: Before performing this reset method, you should complete the factory reset using the online interface. It is expected to unravel most of the issues you’re facing together with your Amcrest camera. This method can be useful if you cannot physically access your camera while preserving your other settings. The hard reset method requires you to possess physical access way to reset Amcrest camera from the reset button.


If you’ve got planned to perform a tough reset of your Amcrest camera, then locate the external factory push button at the backside of your Amcrest camera(as shown in the image above).

Here are the steps for Amcrest ip camera reset

  • Open the camera
  • Press and hold the reset button for 20 seconds
  • Now release the reset button one the led starts flashing
  • Wait for the camera to reboot as it takes few seconds for camera to load
  • Now you can create the password and camera reset is complete

Please note* The LED will light up the button when you hold it for 20 sec. It resets the Amcrest camera back to its original factory defaults. Be careful with this button in standard scenarios once you don’t want to reset your camera. In a problematic case, you would like to proceed with pressing this button for about 20 seconds for reset. You will notice a change in the light above the button which has now turned red from green. This shows that the reset process has started. Now this may completely restore your camera to its factory defaults.
The factory reset will finish once you notice the camera tilting side wise. The light above the reset button will once again turn green. After that, you’ll set your new password and username for your camera by accessing the web UI to form sure the security and privacy of your data.

Amcrest camera reset: Factory Reset ASH21 camera

ASH21 Factory reset differs only with the button on the camera and you need to locate that Reset button by sliding the camera upward, as shown in the image below. We recommended users to delete that particular camera/device from the Amcrest Smart Home account before doing a Amcrest factory reset. Please follow the below given instructions for ASH21 Amcrest camera factory reset.

  • To Locate Rest button to perform Factory Reset on Amcrest ASH21 Camera, Raise the camera upward a little and you will see the Amcrest camera reset button on the right side as shown in this image below.
Amcrest camera reset button on ASh21 camera
  • Once you have located the reset button, Now press and hold this factory reset button for 45 to 60 seconds and allow the camera to reset, it takes few minutes to complete the reset. While the camera completes the Amcrest factory reset process, the camera will rotate and the front LED of the camera will blink green, indicating the completion of process and is now ready to be connected back to the app.
  • Now you need to reconnect the camera via the App on your phone or tab. 

How to Perform a Factory Reset Amcrest Outdoor camera

When it comes to resetting the outdoor camera it may not be possible to reach the camera due to its location or position. Outdoor cameras are generally placed higher so you may not be able to access it every time. Always consider performing a physical or hard factory reset as the second option with soft reset being the first option. We strongly recommended to perform a Amcrest camera reset via the web user interface (Web UI) of the camera on a computer or even browser on you phone. This is useful when you do not have the direct or physical access to cameras. For more information on how to perform a factory reset in the web UI of your camera, See the steps below.

  • We need to log in to the web user interface (Web UI) for cameras.
  • In the web UI, now we need to navigate to, Setup option and then select System and select Default Settings.
  • One in default settings now in the mid of screen you will see two option, default settings and factory default, lets click on Factory Default.
  • Next, the prompt will appear for confirmation to proceed with the factory reset.
  • Now you need to enter the password for your camera and then click Save to start the reset. Wait for few seconds and reset will be complete.

To do Hard Reset for Amcrest outdoor Camera: You would need a screwdriver to open the camera hatch to access reset button. You check the camera manual to know if your camera has a reset button behind the hatch or it has a reset button on the motherboard, depending upon your camera model it will vary.

For reset button on the motherboard : To perform a hard factory reset of your device, you will need to open the camera and gain access to the camera’s motherboard. On the board there will be a small black button inside. Please press and hold the button for 45 seconds, then let it go. Please see this reference image that will help you locate the reset button.

reset button on the motherboard of amcrest outdoor camera

Amcrest outdoor camera reset button with hatch

  • First step is to locate the reset hatch on the top of the camera. Then using a Phillips head screwdriver, you will have to remove the 2 screws to open the hatch.
  •  Once the latch is open, you need to locate the reset button, which is generally next to the MicroSD slot on the camera.
  • To begin the process of reset, Press and hold the reset button for 30-45 seconds and allow the camera to reset.
  • Once the reset is complete place the reset hatch back onto the camera and secure it. The camera factory reset is done and it has been reverted to original factory settings, which also includes usernames, passwords along with other settings. The default username and password will be admin.
  • Set up and password and reconnect it to your network or Internet and you should be good to go.

How to Perform Amcrest Factory Reset For NVR

Sometimes, due to Amcrest NVR malfunction or issues with device features and performance, you may be left with the only option to reset Nvr to factory settings. To begin the physical factory reset process you will need to remove the top NVR cover. Use a Phillips head screwdriver to remove the screws securing the cover. Once the screws are removed, you need to lift the lid to see the NVR’s motherboard. On the NVR motherboard you will have to locate a small black button, which is the factory reset switch for your device.

Process for Amcrest NVR factory reset:

  • Remove the cover of the NVR, Remove the screws on side and bottom to remove the cover (refer to usr manual for your device model)
  • To factory reset NVR, you need to hold the reset button down and unplug the NVR from power.
  • Once power cable is disconnected from the unit, please continue holding the factory reset button for atleast 4 – 5 seconds, while you are holding the reset button, now plug the power supply back into the unit. ( you should be holding the button down when you reconnect power cable)
  • Now when power is reconnected, you should hear a beep sound , even if it is not giving beep sound thats alright and proceed. Continue holding the reset button and allow the device to initialize for 20 – 30 seconds and then release the button once the system finishes loading. 

For any issue after this reset or problems with reset speak to us for further diagnostics. Dial +1 530-455-9359 and talk to Amcrest support

Amcrest Camera Factory Reset Button Hold Time For Various Models

Check out this part and according to your device see the Reset button hold time for factory reset of your device. Speak with support, if cannot figure out for little more complicated reset procedure for your device.

For IP2M841 and V3 model: The reset button hold time is of 20 seconds

For ASh21: The reset button hold time is 45 seconds.

Amcrest IP2M-842/IPM-722 Bullet camera: The Reset button hold time is 30 seconds.

Factory Reset (IP4M-1051) PRo HD : The reset button hold time is of 20 seconds.

Factory Reset (IP4M-1054E): Press and hold the factory reset switch for 20 – 30 seconds and then release.

Factory Reset (IP4M-1026): For this device you need to open the cover and keep the POE cable connected. The RST button is the Reset button on this camera and hold time is of 30 seconds.

Factory Reset (IP4M-1024E): For this device you need to access the camera’s motherboard. Use a paperclip for touching the filaments together for at least 5 seconds and reset will start.

Factory Reset (IP4M-1048EW-AI): Hold the reset button for 30-45 seconds. However, holding it for more than 30 Seconds will initiate the Amcrest camera reset process.

Factory Reset (IP4M-1046EW-AI): Locate the factory reset switch on the motherboard of the camera. The factory reset switch is right next to the microSD card slot. The hold time for Resetting this Amcrest camera is 10 – 20 seconds and then allow the camera to reset. 

Factory Reset (IP4M-1026E): Unfasten and remove the top shield of the camera and then remove the top plastic covering around lens and IR and access motherboard. Locate the small factory reset switch on the motherboard, Press and hold for about 45 seconds and the camera will reset.

Factory Reset (IP4M-1055E): Remove the metal casing around the unit to access Amcrest camera reset switch on the mother board and also remove the lens cover on the eyeball portion of the camera to access it. Press and hold the factory reset switch for 45 seconds

Sours: https://amcrest-support.com/reset-amcrest-camera/
  1. Huntingdon county 911
  2. Line art hentai
  3. Aafp asus motherboard
  4. Amazon embossing machine
  5. Sole swap donors

Amcrest default password and IP address

In this article, you can find the Amcrest default password and learn how to change the default IP address in the first login. The process takes less than 5 minutes.

Amcrest Bullet Camera

The Amcrest camera comes with a default password

If you are trying to access your Amcrest camera for the first time and have no idea how to get it working, this article can help you with a step-by-step procedure.

The Amcrest default password and IP address

Default username:  admin

Default password: admin

Default IP address: 192.168.1.108

The camera used as an example in this article is the Amcrest IP4M-1046EW-AI

The information may be similar to other Amcrest models, but in any case, there's a way to get into the camera configuration using the Amcrest IP config tool.

Let's take a look at how to change the username and password for the camera.

The following diagram shows the Amcrest camera connected to a PoE switch.

Note the Default IP address 192.168.1.108 that I will change to 192.168.0.105.

Amcrest camera network diagram

In this example, I use a switch, but it could also be a router.

I'm assuming the Amcrest camera will not automatically get an IP from a local router (I don't have one in this example). Let's work with static IPs. 

The IPs in red represent the camera network range 192.168.1.x

The IPs in blue represent the laptop network range 192.168.0.x.

It's necessary to add an extra IP to the laptop (192.168.1.161), so it can access the camera via its default IP (192.168.1.108) and then change the camera IP to  a new one(192.168.0.105). I hope this makes sense... Please make you understand that.

==> If you changed the password and don't remember it, please watch the video in the end of this article for more information on how to reset it.

Add an extra IP to your laptop / computer

You can add an extra IP to your laptop so you can access the Amcrest camera.

Just follow the steps below.

  • Open the "Network & Internet Settings";
  • Click on the Ethernet icon;
  • Click on "Change adapter options";
  • Select "properties";
  • Select "Internet Protocol Version 4";
  • Click on "Advanced";
  • Click on "Add";
  • Add an extra IP address.

See the following picture for more details.

Right-click the network icon and click "Open Network Internet Settings".

Open Network and Internet Settings

Select "Ethernet," which represents your computer's interface.

Network settings

Click on "Change Adapter Options"

Winbdows Change Adapter Options

Click on "Properties"

Network Interface Properties

Click on "Internet Protocol Version 4"

Network IPv4

Click on "Advanced"

Advanced IP Settings

Click on "Add"

Add button

Add the IP address that is the same network range as the camera (192.168.1.x)

Extra IP

Use the Amcrest IP config tool

Now you can use the Amcrest IP config tool to change the camera's IP address.

Open the software and wait for it to find the IP camera.

Amcrest IP Config found the camera

Click on "Login"

Login with the default username and password  admin/admin

Amcres IP Config Login

On the "NET" tab, uncheck the DHCP box.

Change the camera's IP address.

Click the "Save" button.

Change the Amcrest Camera IP Address

Open a web browser and type the camera's IP address.

Login with the default username and password admin/admin

Change the password (mandatory).

Login and change the password

And it's done. Now you have your Amcrest camera using a new IP and password.

Video: How to reset the Amcrest camera

If you changed the default camera password but don't remember it anymore, it's necessary to reset the camera to factory default. Here's a video on how to do that.

Now you know how the Amcrest default password and IP addres and how  to change the them if necessary, you can use this procedure for different models.

If you need extra help, please visit the Amcrest Website.

Sours: https://learncctv.com/change-amcrest-camera-default-ip/
How To Setup Amcrest ProHD Camera Using Amcrest View App

This guide shows the Amcrest default password, the Amcrest camera default IP address, and how to modify them. The process is quite simple and just takes a few minutes to complete.

There are various Amcrest models of DVRs and NVRs on the market that use different default usernames and passwords. Actually, the latest Amcrest recorders don’t come with a password, you create one once you run the recorder for the first time. Below we’ve listed the default accounts and the passwords for Amcrest DVR or NVR. Below we’ve listed the default accounts and the passwords for Amcrest DVR or NVR.

Amcrest default password

The default username and password for Amcrest DVR/NVR and IP cameras are “admin” for both. However, Amcrest recorders come with various types of accounts (admin, guest, user). Check the list below and try them out in your recorder or standalone IP camera.

  • username: admin and password: admin (Type of the account: Master User)
  • username: admin and password: 888888 (Type of the account: Administrator)
  • username: admin and password: 666666 (Type of the account: Guest user)
  • username: default and password: default (Type of the account: Hidden)

Only the admin account works via the web browser and the rest work only when typed directly on the recorder. For example, the account “888888” doesn’t work on the web interface but works locally.

Also, the Amcrest IP cameras use only the admin account (the reset of the accounts listed above are applicable to recorders only).

The default password for the latest Amcrest DVRs/NVRs and IP cameras

The new generation of Amcrest DVRs and NVRs are shipped out without any password or as they call the recorders are “inactive”. The end-user or the installer has to initialize and create a new password once the recorder runs up for the first time.
Amcrest Default PasswordDuring the Startup Wizard, you will be able to set up the Admin Password (The default Username for the Administrator Account is “admin”). Make sure to select a strong password that meets the requirements of your system.

On some versions, on the Login Setup screen, you also will be required to enter a recovery email to be used in case you lose or forget your password. Also, you can set up security questions to recover your password.

Amcrest Default IP Address

Amcrest’s default IP address is 192.168.1.108. All the IP cameras, NVRs, DVRs come with this IP address. Obviously, you need to modify the IP address of the camera and match it with your own network.

We will demonstrate easily how to change the default IP address of the camera. So, we have a camera and this camera is connected to a PoE switch, the laptop is getting the internet from the same switch (or router where this switch is connected to). For illustration, check the picture below.

Amcrest Default Password

As you can see the camera is connected to the PoE switch (or router) and the laptop/computer is getting the internet from the same switch/router.

Change Amcrest’s camera IP address

To change the default IP address you need to use Amcrest’s IP config tool which is the same as the Dahua configuration tool and can be downloaded here. Once it’s downloaded to your laptop, install it and then run the software.

Basically, this tool will scan the local network and list any IP cameras, DVRs, NVRs found on the network. In our case, we see a few devices there, find the one that is a camera (camera icon and the IP address 192.168.1.108).

Select it and click Login (or double click), type the camera’s default username and password. Once you do that, you should see the next window which is shown below. From there you can modify the IP address of the camera, subnet mask, and gateway.

Amcrest Default Password

Match the IP format of your network. If your router’s IP address is 192.168.0.1 then the camera’s IP address should be modified to 192.168.0.xxx (where xxx is a random number from 2 to 254). If your router’s address is 192.168.1.1 then you can change the camera’s IP address to 192.168.1.110.

To change the Amcrest’s camera password, just log in to the camera via the web browser using the default password and then modify it to the account section. Additionally, you can change it via the configuration tool as well.

Conclusion

Following the guide above you can change the default password or IP address of Amcrest cameras. Never use the default password, always change it and make sure to use a strong one (combination of letters, numbers, and special characters). If you’re stuck, contact Amcrest (or the seller) for technical support.

Disclosure:Some of the links in this post are Amazon affiliate links. This means if you click on the link and purchase any item, we will receive an affiliate commission at no extra cost to you. Thanks for your support!

Sours: https://securitycamcenter.com/amcrest-default-password/

Camera login amcrest

Amcrest IP Camera addition with "User name and password error" message connecting to Hikvision DS-7616NI-I2

Hi Alastair:
Thank you for all your responses and advice. I am happy to report that I am now able to see all AmcrestCameras and they are online. This was a great learning experience and I hope it helps other in the future with ONVIF camera's and Hikvisionconfiguration. Once again I want to thank this community and all it members for their efforts of making IP camera setups a bit more archivable with the help this website brings.

resolution.JPG

QUOTE="alastairstevenson, post: 520105, member: 1907"]
Just to save effort for any future similar requirements -
You will be able to access any other NVR PoE port connected cameras if you connect the PC into an unused NVR PoE port.
And these days, a normal straight cable will work OK, a crossover isn't needed.

Thank you Alastair for this tip. I can now see the logic of this working since the ports are on the 1923.168.254.x side of the LAN

Security column question Quote
Yes, it's commenting on the strength of the assigned password, usually an indication that the number of characters is a bit small.

Yes, this makes sense now. It is the strength of the password chosen. Not too concerning as I plan on keeping this a closed network with no external access to the Web.

Generally for ONVIF on a HikvisionNVR it's best to set the channel to Manual instead of Plug&Play and set the IP address and password to match those that you have pre-defined on the camera.
[/QUOTE]

Yes, it reminds of the old saying devices can sometimes be 'plug and pray' rather than 'plug and play '☺. I have now learned that passwords need to be managed at the camera level as well.

Once again thank you for all your advice and assistance.

 

Sours: https://ipcamtalk.com/threads/amcrest-ip-camera-addition-with-user-name-and-password-error-message-connecting-to-hikvision-ds-7616ni-i2.53655/
How To Setup Amcrest ProHD Camera Using Amcrest View App

.

You will also like:

.



560 561 562 563 564